Replacing FRUs

go to back go to home menu  

Replacing the USB 3.1 Gen 1 Type-C connector board

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

  1. 1

    Remove the slide cover.  For details, see Removing the slide cover.

  2. 2

    Remove the storage drive.  For details, see Replacing the 2.5-inch storage drive.

  3. 3

    Remove the optical drive.  For details, see Replacing the optical drive.

  4. 4

    Remove the computer cover and side I/O bezel.  For details, see Replacing the computer cover and side I/O bezel.

  5. 5

    Remove the system board shield and side I/O bracket.  For details, see Replacing the system board shield and side I/O bracket.

  6. 6

    Disconnect the USB 3.1 Gen 1 Type-C connector board cable from the system board.  For details, see System board.

  7. 7

    Replace the USB 3.1 Gen 1 Type-C connector board.



    1. 1 Removing the USB 3.1 Gen 1 Type-C connector board
    2. 2
      Installing the USB 3.1 Gen 1 Type-C connector board
  8. 8

    Connect the USB 3.1 Gen 1 Type-C connector board cable to the system board.  For details, see System board.

  9. 9

    Reinstall the removed parts and slide cover.  For details, see Completing the parts replacement.