Replacing CRUs

go to back go to home menu  

Replacing the optical drive

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

  1. 1

    Remove the computer stand.  For details, see Replacing the monitor stand or Replacing the UltraFlex II Stand.

  2. 2

    Remove the slide cover.  For details, see Removing the slide cover.

  3. 3

    Remove the storage drive.  For details, see Replacing the storage drive.

  4. 4

    Replace the optical drive.



    1. 1 Removing the optical drive from the computer
    2. 2 Removing the optical drive bracket
    3. 3 Inserting a stick with one pointed end to the drive hole
    4. 4 The optical drive bay pops up
    5. 5 Removing the optical drive bezel
    6. 6 Aligning the plastic tabs in the drive bezel with the holes in the optical drive bay
    7. 7 Installing the optical drive bezel
    8. 8 Pressing the optical drive to lock it
    9. 9 Installing the optical drive bracket
    10. 10 Installing the optical drive
  5. 5

    Reinstall the removed parts and slide cover.  For details, see Completing the parts replacement.