Replacing FRUs

go to back go to home menu  

Replacing the microprocessor

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

  1. 1

    Remove the slide cover.  For details, see Removing the slide cover.

  2. 2

    Remove the storage drive.  For details, see Replacing the 2.5-inch storage drive.

  3. 3

    Remove the optical drive.  For details, see Replacing the optical drive.

  4. 4

    Remove the computer cover and side I/O bezel.  For details, see Replacing the computer cover and side I/O bezel.

  5. 5

    Remove the system board shield and side I/O bracket.  For details, see Replacing the system board shield and side I/O bracket.

  6. 6

    Remove the heat sink.  For details, see Replacing the heat sink.

  7. 7

    Replace the microprocessor.

    Notes

    • Your microprocessor and socket might look different from the one illustrated.
    • Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.
    • Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible.


    1. 1 Opening the retainer
    2. 2 Pivoting up the socket
    3. 3 Removing the microprocessor
    4. 4 Instaling the microprocessor
    5. 5 Pivoting the socket downward
    6. 6 Closing the retainer
  8. 8

    Reinstall the removed parts and slide cover.  For details, see Completing the parts replacement.