Replacing FRUs

go to back go to home menu  

Replacing the card reader

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

  1. 1

    Remove the slide cover.  For details, see Removing the slide cover.

  2. 2

    Remove the storage drive.  For details, see Replacing the 2.5-inch storage drive.

  3. 3

    Remove the optical drive.  For details, see Replacing the optical drive.

  4. 4

    Remove the computer cover and side I/O bezel.  For details, see Replacing the computer cover and side I/O bezel.

  5. 5

    Remove the system board shield and side I/O bracket.  For details, see Replacing the system board shield and side I/O bracket.

  6. 6

    Disconnect the card reader cable from the system board.  For details, see System board.

  7. 7

    Replace the card reader.



    1. 1 Removing the card reader
    2. 2
      Installing the card reader
  8. 8

    Connect the card reader cable to the system board.  For details, see System board.

  9. 9

    Reinstall the removed parts and slide cover.  For details, see Completing the parts replacement.