Replacing CRUs

go to back go to home menu  

Replacing the memory module

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

If your computer supports one memory module, install the module into the DIMM 1 slot. If your computer supports two memory modules, install one memory module into the DIMM 1 slot first and then install the other into the DIMM 2 slot.

  1. 1

    Remove the computer stand.  For details, see Replacing the monitor stand or Replacing the UltraFlex II Stand.

  2. 2

    Remove the slide cover.  For details, see Removing the slide cover.

  3. 3

    Replace the memory module.



    1. 1 Removing the memory module shield
    2. 2 Opening the retaining clips
    3. 3 Removing the memory module
    4. 4 Installing the memory module
    5. 5 Pressing the memory module downward
    6. 6 Installing the memory module shield
  4. 4

    Reinstall the removed parts and slide cover.  For details, see Completing the parts replacement.