Replacing FRUs

go to back go to home menu  

Replacing the computer cover and side I/O bezel

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

Caution

Before you open the computer cover, turn off the computer and wait several minutes until the computer is cool.

  1. 1

    Remove the slide cover.  For details, see Removing the slide cover.

  2. 2

    Remove the storage drive.  For details, see Replacing the 2.5-inch storage drive.

  3. 3

    Remove the optical drive.  For details, see Replacing the optical drive.

  4. 4

    Disconnect the control button board cable from the control button board.

  5. 5

    Replace the computer cover and side I/O bezel.



    1. 1 Removing the bezel
    2. 2 Removing the cover
    3. 3 Installing the cover
    4. 4 Installing the bezel
  6. 6

    Connect the control button board cable to the control button board.

  7. 7

    Reinstall the removed parts and slide cover.  For details, see Completing the parts replacement.