Replacing FRUs

go to back go to home menu  

Replacing the SATA cables

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

  1. 1

    Remove the slide cover.  For details, see Removing the slide cover.

  2. 2

    Remove the storage drive.  For details, see Replacing the 2.5-inch storage drive.

  3. 3

    Remove the optical drive.  For details, see Replacing the optical drive.

  4. 4

    Remove the computer cover and side I/O bezel.  For details, see Replacing the computer cover and side I/O bezel.

  5. 5

    Remove the system board shield and side I/O bracket.  For details, see Replacing the system board shield and side I/O bracket.

  6. 6

    Remove the VESA mount bracket.  For details, see Replacing the VESA mount bracket and cover presence switch.

  7. 7

    Remove the power supply assembly.  For details, see Replacing the power supply assembly.

  8. 8

    Remove the system fan.  For details, see Replacing the system fan.

  9. 9

    Disconnect the SATA cables from the system board.  For details, see System board.

  10. 10

    Replace the SATA cables.



    1. 1 Removing the cables
    2. 2 Installing the cables
  11. 11

    Connect the SATA cables to the system board.  For details, see System board.

  12. 12

    Reinstall the removed parts and slide cover.  For details, see Completing the parts replacement.