Replacing FRUs

go to back go to home menu  

Replacing the M.2 storage drive

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

  1. 1

    Remove the slide cover.  For details, see Removing the slide cover.

  2. 2

    Remove the storage drive.  For details, see Replacing the 2.5-inch storage drive.

  3. 3

    Remove the optical drive.  For details, see Replacing the optical drive.

  4. 4

    Remove the computer cover and side I/O bezel.  For details, see Replacing the computer cover and side I/O bezel.

  5. 5

    Remove the system board shield and side I/O bracket.  For details, see Replacing the system board shield and side I/O bracket.

  6. 6

    Depending on your computer model, refer to one of the following to replace the M.2 storage drive.

    Note

    If necessary, you might need to replace the thermal pad sticked on the system board shield.

    • Type 1


    1. 1 Removing the screw
    2. 2 Removing the drive
    3. 3 Installing the drive
    4. 4 Installing the screw


    • Type 2


    1. 1 Removing the screw
    2. 2 Removing the drive
    3. 3 Installing the drive
    4. 4 Installing the screw
  7. 7

    Reinstall the removed parts and slide cover.  For details, see Completing the parts replacement.