Replacing the Wi-Fi antennas

Note

Always remove the rear Wi-Fi antenna cover before installing the M910x computer into the TIO monitor model: Tiny-in-One 23- Monitor (MT: 10DQ).

Attention

Do not open your computer or attempt any repairs before reading the Important Product Information Guide.

1

Remove the computer cover. For details, see Removing the computer cover.
2

Remove the storage drive. For details, see Replacing the storage drive.
3

Remove the system fan. For details, see Replacing the system fan.
4

Remove the PCI Express card. For details, see Replacing the PCI Express card and PCI Express card adapter.
5
Replace the front Wi-Fi antenna.
1. 1
2. 2
3. 3
4. 4
6

Reinstall the removed parts and computer cover. For details, see Completing the parts replacement.

1

Remove the computer cover. For details, see Removing the computer cover.
2

Remove the storage drive. For details, see Replacing the storage drive.
3

Remove the system fan. For details, see Replacing the system fan.
4

Remove the PCI Express card. For details, see Replacing the PCI Express card and PCI Express card adapter.
5

Disconnect the rear Wi-Fi antenna cable from the Wi-Fi card.
6
Replace the rear Wi-Fi antenna.

Note

Record the cable routing before removing the rear Wi-Fi antenna cable.
1. 1
2. 2
3. 3
4. 4
5. 5
6. 6
7

Connect the rear Wi-Fi antenna cable to the Wi-Fi card.
8

Reinstall the removed parts and computer cover. For details, see Completing the parts replacement.