Replacing CRUs

go to back go to home menu  

Replacing the memory module

Attention

Do not open your computer or attempt any repairs before reading the Important Product Information Guide.

If your computer supports one memory module, install the module into the DIMM 1 slot. If your computer supports two memory modules, install one memory module into the DIMM 1 slot first and then install the other into the DIMM 2 slot. See System board for the locations of the slots.

  1. 1

    Remove any media from the drives and turn off all connected devices and the computer.

  2. 2

    Disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.

  3. 3

    Remove the computer cover.   For details, see Removing the computer cover.

  4. 4

    Remove the bottom cover.   For details, see Replacing the bottom cover.

  5. 5

    Replace the memory module.



    1. 1 Opening the retainer
    2. 2 Removing the memory module
    3. 3 Installing the memory module
    4. 4 Closing the retainer
  6. 6

    Reinstall the removed parts and computer cover.  For details, see Completing the parts replacement.