Replacing CRUs

go to back go to home menu  

Replacing the storage drive

Attention

Do not open your computer or attempt any repairs before reading the Important Product Information Guide.

  1. 1

    Remove any media from the drives and turn off all connected devices and the computer.

  2. 2

    Disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.

  3. 3

    Remove the computer cover.   For details, see Removing the computer cover.

  4. 4

    Disconnect the storage drive cables from the system board.

  5. 5

    Replace the storage drive.



    1. 1 Removing the bracket
    2. 2 Removing the storage drive
    3. 3 Installing the storage drive
    4. 4 Installing the bracket
  6. 6

    Connect the storage drive cables to the system board.

  7. 7

    Reinstall the computer cover and reconnect the cables.  For details, see Completing the parts replacement.