Replacing CRUs

go to back go to home menu  

Replacing the system fan

Attention

Do not open your computer or attempt any repairs before reading the Important Product Information Guide.

  1. 1

    Remove any media from the drives and turn off all connected devices and the computer.

  2. 2

    Disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.

  3. 3

    Remove the computer cover.   For details, see Removing the computer cover.

  4. 4

    Remove the storage drive.   For details, see Replacing the storage drive.

  5. 5

    Remove the internal speaker.   For details, see Replacing the internal speaker.

  6. 6

    Release the illuminated red dot cable from the system fan.

  7. 7

    Disconnect the system fan cable from the system fan connector on the system board.

  8. 8

    Replace the system fan.



    1. 1 Removing the fan
    2. 2 Installing the fan
  9. 9

    Connect the system fan cable to the system fan connector on the system board.

  10. 10

    Install the illuminated red dot cable to the new system fan.

  11. 11

    Reinstall the computer cover and reconnect the cables.  For details, see Completing the parts replacement.