Thank you for choosing Lenovo® Legion Go! This user guide contains all the fundamentals about your Legion Go, including but not limited to its features, specifications, setup instructions, power management, and FAQs. Click the buttons below to explore this guide and learn how to use your Legion Go.
Your tablet includes an ambient light sensor and the adaptive brightness feature is enabled. The light sensor can detect the intensity of the ambient light. Using data provided by the sensor, the operating system can dynamically adjust the screen brightness.
The adaptive brightness feature of the operating system can be disabled. For Windows operating systems, adaptive brightness settings are usually found in Settings ➙ System ➙ Display.
You can play video games when one controller is connected to the tablet using a wired connection and the other one is connected to the tablet using a wireless connection.
When the two controllers are attached to the tablet, the console is in X-input mode. After you detach one controller from the tablet, the console enters Dual D-input mode. After the two controllers are both detached from the tablet, the console enters X-input mode again.
When the console is in the bag, you can charge it using a Type-C cable through the opening in the rear of the bag.
Three possible situations may lead the controller to turn off automatically.
In rare cases, your console may malfunction, such as failing to connect to a device. To reset the controller, you can depress the reset hole above the slide rail of the controller by using a SIM card ejection pin.
If the problem still cannot be solved, you can try resetting the controller to factory settings. Press and hold Legion L + LB + LS for 3 seconds to reset the left controller to factory settings. Press and hold Legion R + RB + RS for 3 seconds to reset the right controller to factory settings.
The dead zone is where you can move your joystick before the input is registered. The larger the dead zone, the more effort is required to register inputs. However, if the dead zone is too small, the controller may become too sensitive, even causing false inputs when the joystick is untouched.
Make sure the controllers are connected to the tablet.
A gyro is a device that measures and maintains the rotational motion. It is built in the controller to help control the game’s objects and provide feedback to you.
Front
Back
Top
Bottom
