Replacing FRUs

go to back go to home menu  

Replacing the 2.5-inch storage drive cable

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

  1. 1

    Remove the computer stand.  For details, see Replacing the monitor stand or Replacing the UltraFlex II Stand.

  2. 2

    Remove the computer cover.  For details, see Removing the computer cover.

  3. 3

    Remove the VESA mount bracket.  For details, see Replacing the VESA mount bracket.

  4. 4

    Remove the middle frame.  For details, see Replacing the middle frame.

  5. 5

    Remove the system board shield.  For details, see Replacing the system board shield.

  6. 6

    Disconnect the power cable and the signal cable from the system board.  For details, see System board.

  7. 7

    Replace the 2.5-inch storage drive cable.



    1. 1 Removing the storage drive cable
    2. 2 Installing the storage drive cable
  8. 8

    Connect the power cable and the signal cable to the system board.  For details, see System board.

  9. 9

    Reinstall the removed parts and computer cover.  For details, see Completing the parts replacement.