Replacing FRUs

go to back go to home menu  

Replacing the integrated camera

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

  1. 1

    Remove the computer stand.  For details, see Replacing the monitor stand or Replacing the UltraFlex II Stand.

  2. 2

    Remove the computer cover.  For details, see Removing the computer cover.

  3. 3

    Remove the optical drive.  For details, see Replacing the optical drive.

  4. 4

    Remove the VESA mount bracket.  For details, see Replacing the VESA mount bracket.

  5. 5

    Remove the middle frame.  For details, see Replacing the middle frame.

  6. 6

    Remove the system board shield.  For details, see Replacing the system board shield.

  7. 7

    Replace the internal speakers.  For details, see Replacing the internal speakers.

  8. 8

    Disconnect the integrated camera cable from the camera.

  9. 9

    Depending on your computer model, refer to one of the following to replace the integrated camera.

    • Type 1


    1. 1 Removing the camera
    2. 2 Installing the camera
    • Type 2


    1. 1 Removing the camera
    2. 2 Installing the camera
  10. 10

    Connect the integrated camera cable to the new camera.

  11. 11

    Reinstall the removed parts and computer cover.  For details, see Completing the parts replacement.