Replacing FRUs

go to back go to home menu  

Replacing the microprocessor

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

  1. 1

    Remove the computer stand.  For details, see Replacing the monitor stand or Replacing the UltraFlex II Stand.

  2. 2

    Remove the computer cover.  For details, see Removing the computer cover.

  3. 3

    Remove the optical drive.  For details, see Replacing the optical drive.

  4. 4

    Remove the VESA mount bracket.  For details, see Replacing the VESA mount bracket.

  5. 5

    Remove the middle frame.  For details, see Replacing the middle frame.

  6. 6

    Remove the system board shield.  For details, see Replacing the system board shield.

  7. 7

    Remove the heat sink.  For details, see Replacing the heat sink.

  8. 8

    Replace the microprocessor.

    Notes

    • Your microprocessor and socket might look different from the one illustrated.
    • Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.
    • Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible.


    1. 1 Releasing the holder
    2. 2 Pivoting up the socket
    3. 3 Removing the microprocessor
    4. 4 Instaling the microprocessor
    5. 5 Pivoting the socket downward
    6. 6 Securing the holder
  9. 9

    Reinstall the removed parts and computer cover.  For details, see Completing the parts replacement.