Replacing FRUs

go to back go to home menu  

Replacing the thermal sensor

Attention

Do not open your computer or attempt any repairs before reading the Important Product Information Guide.

  1. 1

    Remove the computer cover.  For details, see Removing the computer cover.

  2. 2

    Remove the front bezel.  For details, see Replacing the front bezel.

  3. 3

    Disconnect the thermal sensor cable from the system board.

  4. 4

    Replace the thermal sensor.



    1. 1 Pressing the tab to unlock the thermal sensor
    2. 2 Pivoting the drive bay assembly upward
    3. 3 Removing the thermal sensor
    4. 4 Installing the thermal sensor
    5. 5 Pivoting the drive bay assembly downward
  5. 5

    Connect the new thermal sensor cable to the system board.

  6. 6

    Reinstall the removed parts. To complete the replacement, see Completing the parts replacement.