Replacing FRUs

go to back go to home menu  

Replacing the illuminated red dot cable

Attention

Do not open your computer or attempt any repairs before reading the Important Product Information Guide.

  1. 1

    Remove the computer cover.  For details, see Removing the computer cover.

  2. 2

    Remove the front bezel.  For details, see Replacing the front bezel.

  3. 3

    Replace the illuminated red dot cable.

    Note

    Ensure that you disconnect or reconnect the illuminated red dot cable during the replacement.



    1. 1 Pivoting the drive bay assembly upward
    2. 2 Removing the illuminated red dot cover
    3. 3 Removing the illuminated red dot cable
    4. 4 Installing the illuminated red dot cable
    5. 5 Installing the illuminated red dot cover
    6. 6 Pivoting the drive bay assembly downward
  4. 4

    Reinstall the removed parts. To complete the replacement, see Completing the parts replacement.