Replacing CRUs

go to back go to home menu  

Completing the parts replacement

After completing the installation or replacement for all parts, reinstall the computer cover and reconnect the cables.


To reinstall the computer cover and reconnect the cables to your computer, do the following:


  1. 1

    Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your computer. See System board for the locations of various components in your computer.

  2. 2

    Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of the hinges and sides of the computer chassis to avoid interference when reinstalling the computer cover.

  3. 3

    Reinstall the computer cover.

    Installing the computer cover
  4. 4

    Place the computer in an upright position.

  5. 5

    If a locking device is available, use it to lock the computer. See Locking the computer.

  6. 6

    Reconnect the external cables and power cords to the corresponding connectors on the computer.
    See Front view or Rear view for the locations of various components in your computer.