Replacing CRUs

go to back go to home menu  

Replacing the memory module

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

If your computer supports one memory module, install the module into the DIMM 1 slot. If your computer supports two memory modules, install one memory module into the DIMM 1 slot first and then install the other into the DIMM 2 slot.

  1. 1

    Remove any media from the drives and turn off all connected devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.

  2. 2

    Remove the computer cover.  For details, see Removing the computer cover.

  3. 3

    Remove the front bezel.  For details, see Removing the front bezel.

  4. 4

    Pivot the drive bay assembly upward.  For details, see Pivoting the drive bay assembly upward and downward.

  5. 5

    Replace the memory module.



    1. 1 Opening the retaining clips
    2. 2 Installing the memory module
  6. 6

    Reinstall the removed parts and computer cover, and then reconnect the cables.  For details, see Completing the parts replacement.