Replacing CRUs

go to back go to home menu  

Replacing the optical drive

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

  1. 1

    Remove any media from the drives and turn off all connected devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.

  2. 2

    Remove the computer cover.  For details, see Removing the computer cover.

  3. 3

    Remove the front bezel.  For details, see Replacing the front bezel.

  4. 4

    Disconnect the signal cable and the power cable from the rear of the optical drive.

  5. 5

    Replace the optical drive.



    1. 1 Removing the optical drive
    2. 2 Installing the optical drive
  6. 6

    Reinstall the computer cover and reconnect the cables.  For details, see Completing the parts replacement.