Replacing FRUs

go to back go to home menu  

Replacing front I/O options

Attention

Do not open your computer or attempt any repairs before reading the Important Product Information Guide.

  1. 1

    Remove the computer cover.  For details, see Removing the computer cover.

  2. 2

    Remove the front bezel.  For details, see Replacing the front bezel.

  3. 3

    Disconnect the power button board cable, card reader cable, and the USB 3.1 Type-C connector cable from the system board.

  4. 4

    Replace front I/O options.



    1. 1 Removing the front I/O bracket
    2. 2 Removing the power button board
    3. 3 Removing the card reader bracket
    4. 4 Removing the card reader
    5. 5 Installing the card reader
    6. 6 Installing the card reader bracket
    7. 7 Installing the power button board
    8. 8 Installing the front I/O bracket
  5. 5

    Connect the new power button board cable, card reader cable, and the USB 3.1 Type-C connector cable to the system board.

  6. 6

    Reinstall the removed parts. To complete the replacement, see Completing the parts replacement.