Replacing CRUs

go to back go to home menu  

Replacing the M.2 storage drive

Attention

Do not open your computer or attempt any repairs before reading the Important Product Information Guide.

  1. 1

    Remove the computer cover.  For details, see Removing the computer cover.

  2. 2

    Remove the front bezel.  For details, see Replacing the front bezel.

  3. 3

    Pivot the drive bay assembly upward.  For details, see Pivoting the drive bay assembly upward and downward.

  4. 4

    Depending on your computer model, refer to one of the following to replace the M.2 storage drive.

    • Type 1


    1. 1 Pulling out the stopper
    2. 2 Removing the M.2 storage drive
    3. 3 Installing the M.2 storage drive
    4. 4 Inserting the stopper
    • Type 2


    1. 1 Pulling out the stopper
    2. 2 Removing the M.2 storage drive
    3. 3 Installing the M.2 storage drive
    4. 4 Inserting the stopper
  5. 5

    Reinstall the removed parts. To complete the replacement, see Completing the parts replacement.