Replacing FRUs

go to back go to home menu  

Replacing the internal speaker holder

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

  1. 1

    Remove any media from the drives and turn off all connected devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.

  2. 2

    Remove the computer cover.  For details, see Removing the computer cover.

  3. 3

    Record the routing and connection of the internal speaker cable, and then disconnect the cable from the system board.

  4. 4

    Remove the internal speaker.  For details, see Replacing the internal speaker.

  5. 5

    Replace the internal speaker holder.



    1. 1 Removing the internal speaker holder
    2. 2 Installing the internal speaker holder
  6. 6

    Connect the cable of the internal speaker to the internal speaker connector on the system board.

  7. 7

    Reinstall the removed parts and computer cover, and then reconnect the cables.  For details, see Completing the parts replacement.