Replacing CRUs

go to back go to home menu  

Replacing the external optical drive

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

  1. 1

    Remove any media from the drives and turn off all connected devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.

  2. 2

    Disconnect the external optical drive adapter from the USB connectors on the external optical drive and the computer.

  3. 3

    Replace the external optical drive.



    1. 1 Removing the external optical drive box
    2. 2 Removing the external optical drive
    3. 3 Removing the optical drive holder
    4. 4 Installing the optical drive holder
    5. 5 Installing the external optical drive
    6. 6 Installing the external optical drive box
  4. 4

    Connect the external optical drive adapter to the USB connectors on the external optical drive and the computer.