TrackPoint Quick Menu
TrackPoint Quick Menu is a clickable app. It offers rapid access to functions, such as camera, microphone, and touchpad. You can adjust the function settings in this app.
Launch the TrackPoint Quick Menu
Double-tap the TrackPoint pointing stick to launch the TrackPoint Quick Menu. You can also set single-tapping as the launch gesture.
If the TrackPoint Quick Menu does not pop up after you use the launch gesture, this case might be caused by the displacement of the TrackPoint pointing stick due to too much force applied on it. Wait 15 to 30 seconds and try again.
To change the settings, do the following:
The TrackPoint Quick Menu is enabled by default. Press Fn+G to disable or enable the tapping gesture. When disabled, it cannot be launched by tapping the TrackPoint pointing stick.
Use the TrackPoint Quick Menu
You can click the edit button to rearrange the features in the preview panel, or drag and drop the features on the right to the preview panel to customize your quick menu.
- Camera
You can adjust the brightness and contrast of the camera, and restore the settings to default by tapping the reset button . - Microphone
You can mute your computer, and adjust the sound effect of your microphone by selecting the following modes:- Center mode: Capture the speaker’s voice.
- Spatial mode: Capture the speaker’s voice and the ambience.
When internal microphone is not supported by Dolby or the Dolby driver is disabled, an input device list will be displayed instead. The list provides options and one volume bar to test your microphone.
- Voice typing
You can convert the speech to text in the text box. Click START VOICE TYPING to invoke the text box. - Battery
You can extend the battery lifespan and health by setting the charging threshold below 100%.
To set the threshold, enable the feature and click ADJUST THRESHOLD. Then set the charge threshold in the Vantage app. - Audio playback
You can select the output device of your preference and set the volume of your selected channel or mute it. - Noise suppression
You can suppress your own background noise and the noise from other meeting participants.- Off: Disable noise suppression.
- Low: Suppress low-level background noise.
- High: Suppress all non-speech background noise.
The feature does not work when Dolby Voice is off. Click the link in NOISE SUPPRESSION to help you enable it.
- Enable Haptic Touchpad button area
You can enable or disable the TrackPoint buttons. When the Haptic Touchpad button area is enabled, it works as the TrackPoint buttons corresponding to the left and right buttons on a traditional mouse. When the Haptic Touchpad button area is disabled, it becomes part of the Haptic Touchpad. You can also click ADVANCED SETTINGS to enter OS settings to customize your Touchpad features. - Quick Clean
You can temporarily disable the keyboard, screen, trackpad, and TrackPoint pointing device to clean your computer.
The features might vary due to periodic updates. For details of the version installed on your computer, click the flyout at the top-right corner of the page and click LEARN MORE.
Power saving function