Log in with your fingerprint

Enroll your fingerprints and unlock computer by scanning your fingerprints on the fingerprint reader key.

1. Type Sign-in options in the Windows search box and then press Enter.
2. Select the fingerprint setting and then follow the on-screen instruction to enroll your fingerprint.
   
   

   Note: It is recommended that you put your finger at the middle of the fingerprint reader during enrollment and enroll more than one fingerprint in case of any injuries to your fingers. After the enrollment, the fingerprints are associated with the Windows password automatically.

3. Log in with your fingerprint.

Associate your fingerprints with UEFI BIOS passwords

You can associate your fingerprints with your power-on password and hard disk password. See “Associate your fingerprints with passwords”.

Maintenance tips:

• Do not scratch the surface of the reader with anything hard.
• Do not use or touch the reader with a wet, dirty, wrinkled, or injured finger.

TrackPoint Quick Menu

Launch the TrackPoint Quick Menu

Double-tap the TrackPoint pointing stick to launch the TrackPoint Quick Menu.

The TrackPoint Quick Menu is enabled by default. Press Fn+G to disable or enable the double-tapping gesture. When disabled, it cannot be launched by double-tapping the TrackPoint pointing stick.

Use the TrackPoint Quick Menu

Notes:

• You can click the edit button to rearrange the features in the preview panel, or drag and drop the features on the right to the preview panel to customize your quick menu.
• The features may vary due to periodic updates. For details of the version installed on your computer, click the flyout at the top-right corner of the page and click LEARN MORE.

• Camera

  You can adjust the brightness and contrast of the camera, and restore the settings to default by tapping the reset button .

• Microphone

  You can mute your computer, and adjust the sound effect of your microphone by selecting the following modes:

  • Center mode: Capture the speaker’s voice.
  • Spatial mode: Capture the speaker’s voice and the ambience.

  Note: When internal microphone is not supported by Dolby or the Dolby driver is disabled, an input device list will be displayed instead. The list provides options and one volume bar to test your microphone.

• Voice typing

  You can convert the speech to text in the text box. Click START VOICE TYPING to invoke the text box.

• Battery

  You can extend the battery life by setting the charging threshold below 100%.

  To set the threshold, enable the feature and click ADJUST THRESHOLD. Then set the charge threshold in the Vantage app.

• Audio playback

  You can select the output device of your preference and set the volume of your selected channel or mute it.

• Noise suppression

  You can suppress your own background noise and the noise from other meeting participants.

  • Off: Disable noise suppression.
  • Low: Suppress low-level background noise.
  • High: Suppress all non-speech background noise.

  Note: The feature does not work when Dolby Voice is off. Click the link in NOISE SUPPRESSION to help you enable it.