Secondary storage drive

Prerequisite

Before you start, read Generic Safety and Compliance Notices, and print the following instructions.

Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and permanent loss of data. When handling the internal storage drive, observe the following guidelines:

Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for frequent changes or replacement.
Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get damaged.
Do not apply pressure to the internal storage drive.
Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage drive on a soft material, such as cloth, to absorb physical shocks.

For access, remove these parts in order, if any:

Removal steps of the 3.5-inch secondary storage drive, bracket, and cage

Remove the 3.5-inch secondary storage drive with the plastic bracket from the cage.

Remove the 3.5-inch primary storage drive from the bracket.

Removal steps of the 2.5-inch primary storage drive, storage drive converter, and bracket

Remove the computer cover. See Computer cover.
Disconnect the signal cable and the power cable from the 2.5-inch primary storage drive.
Remove the 2.5-inch primary storage drive, storage drive converter, and bracket.