Replacing FRUs

go to back go to home menu  

Replacing the illuminated red dot

Attention

Do not open your computer or attempt any repairs before reading the Important Product Information Guide.

  1. 1

    Remove the computer cover.  For details, see Removing the computer cover.

  2. 2

    Remove the front bezel.  For details, see Replacing the front bezel.

  3. 3

    Pivot the drive bay assembly outward.  For details, see Pivoting the drive bay assembly inward and outward.

  4. 4

    Disconnect the illuminated red dot cable from the system board.

  5. 5

    Replace the illuminated red dot.



    1. 1 Removing the illuminated red dot
    2. 2 Installing the illuminated red dot
  6. 6

    Connect the new illuminated red dot cable to the system board.

  7. 7

    Reinstall the removed parts. To complete the replacement, see Completing the parts replacement.