Attention: Do not open your computer or attempt any repairs
before reading the Important Product Information Guide.
Remove the computer stand. See Replacing the computer stand.
Remove the computer cover. See Removing the computer cover.
Remove the side I/O bezel. See Replacing the side I/O bezel.
Remove the system board shield. See Replacing the system board shield.
Depending on your computer model, refer to one of the following to replace the M.2 solid-state drive.
Type 1
Figure 1. Removing the screw
Figure 2. Removing the M.2 solid-state drive
Figure 3. Installing the M.2 solid-state drive
Figure 4. Installing the screw
Type 2
Figure 5. Removing the screw
Figure 6. Removing the M.2 solid-state drive
Figure 7. Installing the M.2 solid-state drive
Figure 8. Installing the screw
Reinstall the removed parts. To complete the replacement, see Completing the parts replacement.