Attention: Do not open your computer or attempt any repairs
before reading the Important Product Information Guide.
Remove any media from the drives and turn off all connected devices and the computer.
Disconnect all power cords from electrical outlets and disconnect all cables from the computer.
Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay it down so that the screen is against the surface and the computer cover is facing up.
Replace the computer stand.
Figure 1. Removing the full-function monitor stand
Figure 2. Installing the full-function monitor stand
Place the computer in an upright position.
Reconnect the external cables and power cords to the corresponding connectors on the computer.