Replacing CRUs

go to back go to home menu  

Replacing the internal speaker

Attention

Do not open your computer or attempt any repair before reading the Important Product Information Guide.

  1. 1

    Remove any media from the drives and turn off all connected devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.

  2. 2

    Remove the computer cover.  For details, see Removing the computer cover.

  3. 3

    Record the routing and connection of the internal speaker cable, and then disconnect the cable from the system board.

  4. 4

    Replace the internal speaker.




    1. 1 Removing the internal speaker
    2. 2 Installing the internal speaker
    3. 3 Routing the internal speaker cable
  5. 5

    Connect the cable of the new internal speaker to the internal speaker connector on the system board.

  6. 6

    Reinstall the computer cover and reconnect the cables.  For details, see Completing the parts replacement.