Replacing CRUs

go to back go to home menu  

Replacing the storage drive

Attention

Do not open your computer or attempt any repairs before reading the Important Product Information Guide.

Replacing the 3.5-inch storage drive


  1. 1

    Remove the computer cover.  For details, see Removing the computer cover.

  2. 2

    Remove the front bezel.  For details, see Replacing the front bezel.

  3. 3

    Refer to the following to replace the 3.5-inch storage drive.

    • 3.5-inch primary storage drive

    Note

    Ensure that you disconnect or reconnect the storage drive cables during the replacement.



    1. 1 Pivoting the drive bay assembly upward
    2. 2 Removing the 3.5-inch primary storage drive
    3. 3 Installing the 3.5-inch primary storage drive
    4. 4 Pivoting the drive bay assembly downward
    • 3.5-inch secondary storage drive

    Note

    Ensure that you disconnect or reconnect the storage drive cables during the replacement.



    1. 1 Pivoting the drive bay assembly upward
    2. 2 Removing the 3.5-inch secondary storage drive
    3. 3 Installing the 3.5-inch secondary storage drive
    4. 4 Pivoting the drive bay assembly downward
  4. 4

    Reinstall the removed parts. To complete the replacement, see Completing the parts replacement.

Replacing the 2.5-inch storage drive


  1. 1

    Remove the storage converter with the 2.5-inch storage drive. See  Replacing the 3.5-inch storage drive.

  2. 2

    Replace the 2.5-inch storage drive in the storage converter.



    1. 1 Removing the 2.5-inch storage drive from the storage converter
    2. 2 Installing the 2.5-inch storage drive into the storage converter
  3. 3

    Reinstall the storage converter with the 2.5-inch storage drive. See  Replacing the 3.5-inch storage drive.