Replacing FRUs

go to back go to home menu  

Replacing the microprocessor

Attention

Do not open your computer or attempt any repairs before reading the Important Product Information Guide.

Caution

The heat sink and microprocessor might be very hot. Before you open the computer cover, turn off the computer and wait several minutes until the computer is cool.

  1. 1

    Remove the computer cover.   For details, see Removing the computer cover and dust shield.

  2. 2

    Remove the storage drive.   For details, see Replacing the storage drive.

  3. 3

    Remove the internal speaker.  For details, see Replacing the internal speaker.

  4. 4

    Remove the system fan.  For details, see Replacing the system fan.

  5. 5

    Remove the heat sink.  For details, see Replacing the heat sink.

  6. 6

    Replace the microprocessor.

    Notes

    • Your microprocessor and socket might look different from the one illustrated.
    • Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.
    • Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible.


    1. 1 Opening the retainer
    2. 2 Pivoting up the socket
    3. 3 Removing the microprocessor
    4. 4 Instaling the microprocessor
    5. 5 Pivoting the socket downward
    6. 6 Closing the retainer
  7. 7

    Reinstall the removed parts and computer cover.  For details, see Completing the parts replacement.