Back Quick Start

Specifications

Set up

Manage power

Flip to Start
Specification Description
Memory Low Power Double Data Rate 5X (LPDDR5X), soldered on board, up to 64 GB
Storage device

One slot, 2280 M.2 solid-state drive, up to 2 TB

Note: In case of M.2 SSD replacement, your computer only supports single-sided M.2 SSD. Double-sided M.2 SSD is not applicable due to the height limitation of the slot.
Audio
  • Dolby Atmos®
  • Dolby Voice®
Display
  • 120 Hz refresh rate OLED display*
  • Color display with In-Plane Switching (IPS) technology
  • Display ratio: 16:10
  • Display resolution: 2880 × 1800 pixels or 1920 × 1200 pixels
  • Multi-touch technology*
  • Eye Comfort certified*
Security features
  • Face authentication
  • User Presence Sensing*
  • Human presence detection*
  • Fingerprint reader
  • Lenovo View Privacy Guard*
  • Lenovo View Privacy Alert*
  • Trusted Platform Module (TPM) 2.0*
Wireless features
  • Bluetooth
  • GPS (on wireless WAN model)*
  • Wireless LAN
  • Wireless WAN (4G or 5G)*

    Note: The 4G or 5G cellular service is provided by authorized mobile service carriers in some countries or regions. You must have a cellular plan from a service carrier to connect to the cellular network. The cellular data plan might vary by location.

*for selected models

This section helps you to set up your computer and get it ready for use.

Turn on the computer

Follow the instructions to turn on your computer.

Step 1
Connect the power cord to the ac power adapter.
Step 2
Connect the power adapter to your computer.
Step 3
Plug the power cord into the ac power.
Step 4
Press the power button to turn on your computer.
The illustration that shows how to turn the computer
It is recommended to fully charge the computer when using it for the first time. Click the battery status icon at the bottom right of your desktop to check the battery status.

Complete the operating system setup

Before exploring your computer, you need to complete the operating system setup. The setup includes but is not limited to:

  • Select the country or region.
  • Connect to an available network.
  • Accept the license agreement.
  • Create a Microsoft account or log in with your Microsoft account.
  • Set up your password, fingerprint, or facial recognition as preferred.
  • Customize your experience.
  • Depending on the model, some settings might not be available on your computer.
  • Do not turn off your computer and ensure it is connected to the ac power during the whole process.

Follow the instructions to set up the operating system.

Step 1
Connect the computer to the ac power and turn it on.
Step 2
Follow the on-screen instructions to complete the operating system setup.

Use ac power

Power source of the ac power adapter:

  • Power: 45 W or 65 W
  • Sine-wave input at 50 Hz to 60 Hz
  • Input rating of the ac power adapter: 100 V to 240 V ac, 50 Hz to 60 Hz
  • Output rating of the ac power adapter: 20 V dc, 2.25 A or 3.25 A

When the battery power is low, charge your battery by connecting your computer to ac power with the supplied power adapter. The 65 W ac power adapter supports the rapid charge function, the battery is 80% charged in about one hour when the computer is turned off. The actual charging time depends on the battery size, the physical environment, and whether you are using the computer.

Battery charging is also affected by its temperature. The recommended temperature range for charging the battery is between 10°C (50°F) and 35°C (95°F).

Charge the computer
Some models might not ship with ac adapters or power cords. Use only the certified adapters and power cords provided by Lenovo that comply with the requirements of relevant national standards to charge the product. It is recommended to use the Lenovo qualified adapters. You can refer to https://www.lenovo.com/us/en/compliance/eu-doc.

Maximize the life of the battery

Follow the instructions to maximize the life of the battery.

  • Use the battery until the charge is depleted and recharge the battery completely before using it. Once the battery is fully charged, it must discharge to 94% or lower before it will be allowed to recharge again.
  • Keep the battery from full charge when it is not in heavy use. For more information, refer to the Battery settings tab in the Power section of the Vantage app.
  • The battery might optimize its full charge capacity based on your usage. After prolonged periods of limited use, full battery capacity might not be available until you discharge to as low as 20% and recharge completely. For more information, refer to the Battery settings tab in the Power section of the Vantage app.

Your computer supports Flip to Start feature. If you enable this feature, the computer will start up automatically without pressing power on button when you open the lid.

Flip to Start feature is disabled by default. To enable Flip to Start feature,

Step 1
Open the Vantage app, and then click Device ➙ Power ➙ Power settings.
Step 2
Turn on the Flip to Start toggle to enable the feature.

If the Vantage app is uninstalled, you can enable this feature in UEFI BIOS menu:

Step 1
Restart the computer. When the logo is displayed, press F1 to enter the UEFI BIOS menu.
Step 2
Select Config ➙ Power.
Step 3
Turn on the Flip to Start toggle to enable the feature.