Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access,
remove these parts in order, if any:
Disconnect the card reader cable from the card reader.
Removal steps
| Step | Screw (quantity) | Torque |
|---|---|---|
| 1 | #6-32 × 5 mm (0.2 inches), Nickel coated (1) | 0.56 ± 0.05 Nm (5.75 ± 0.57 kgf-cm) |
| 3 | M3 × 5 mm (0.2 inches), Zn coated (2) | 0.56 ± 0.05 Nm (5.75 ± 0.57 kgf-cm) |