Front-access storage enclosure

Note:

Some computer models might not be shipped with a front-access storage enclosure. In this case, there will be a dummy bezel on the front bezel.
Before removing an old storage drive, safely eject the old storage drive from the operating system first. For more information, see the operating system help system.

Prerequisite

Before you start, read Generic Safety and Compliance Notices, and print the following instructions.

Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and permanent loss of data. When handling the internal storage drive, observe the following guidelines:

Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for frequent changes or replacement.
Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get damaged.
Do not apply pressure to the internal storage drive.
Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage drive on a soft material, such as cloth, to absorb physical shocks.

For access, remove these parts in order:

Removal step

Remove the front-access storage enclosure