Memory module

Follow the instructions to replace the memory module.

Before you start, read Generic Safety and Compliance Notices.

Attention: Do not touch the contact edge of the memory module. Otherwise, the memory module might get damaged.
For access, do the following:

  1. Disable the built-in battery. See Disable the built-in battery.

  2. Turn off the computer and disconnect the computer from ac power and all connected cables.

  3. Close the computer display and turn over the computer.

  4. Remove the base cover assembly. See Base cover assembly.

  5. Remove the memory module shielding cap. See Memory module shielding cap.

Note:Ensure that you follow the installation order for memory modules shown in the following table.
Memory modules Installation order

one

Slot 1

two

Slot 1 and slot 2
Part location
  1. Remove the memory module as shown below.
    ThinkPad T14 Gen 5 and ThinkPad P14s Gen 5 AMD
    Illustration showing how to remove the memory module

    ThinkPad T16 Gen 3
    Illustration showing how to remove the memory module

  2. Install the memory module as shown below.
    ThinkPad T14 Gen 5 and ThinkPad P14s Gen 5 AMD
    Illustration showing how to install the memory module

    ThinkPad T16 Gen 3
    Illustration showing how to install the memory module

Parent topic: Replace a CRU

<© Copyright Lenovo 2023.>