M.2 solid-state drive bracket (for selected models)

Follow the instructions to replace the M.2 solid-state drive bracket.

Before you start, read Generic Safety and Compliance Notices.

For access, do the following:

  1. Disable the built-in battery. See Disable the built-in battery.

  2. Turn off the computer and disconnect the computer from ac power and all connected cables.

  3. Close the computer display and turn over the computer.

  4. Remove the base cover assembly. See Base cover assembly.

  5. Remove the M.2 solid-state drive. See M.2 solid-state drive.

Part location
  1. Remove the M.2 solid-state drive bracket as shown below.
    Remove the M.2 solid-state drive bracket
  2. Install the M.2 solid-state drive bracket in reverse order.
Parent topic: Replace a CRU

<© Copyright Lenovo 2023.>