Enable or disable always-on

For some Lenovo computers with always-on connectors, the always-on function can be enabled or disabled in the UEFI/BIOS setup utility.
  1. Open the UEFI/BIOS setup utility.
  2. Select Configuration > Always On USB and press Enter.
  3. Change the setting to Disabled or Enabled.
  4. Select Exit > Exit Saving Changes.
Note: If Lenovo Vantage or Lenovo PC Manager (software) is pre-installed on your computer, you may also enable or disable always-on in the software.
Parent topic: Change settings in UEFI/BIOS setup utility

<© Copyright Lenovo 2019.>