Memory module

Prerequisite

Before you start, read Generic Safety and Compliance Notices and print the following instructions.

Attention: Do not touch the contact edge of the memory module. Otherwise, the memory module might get damaged.
For access, do the following:

  1. Disable the built-in battery. See Disable Fast Startup and the built-in battery.

  2. Turn off the computer and disconnect the computer from ac power and all connected cables.

  3. Close the computer display and turn the computer over.

Removal procedure


Illustration showing how to remove the base cover

Note: A Mylar film might cover the memory modules. To access the memory modules, peel off the film first.

Illustration of how to remove the memory module.

Installation procedure

If you only install one memory module, install it in memory slot a.
Illustration showing how to install the memory module.


Illustration showing how to install the memory module.

Parent topic: Replace a CRU


<© Copyright Lenovo 2022.>