|
Item |
Description |
Item |
Description |
|---|---|---|---|
|
1 |
ThinkStation® LED |
2 |
Power button |
|
3 |
Power indicator |
4 |
Storage indicator |
|
5 |
Always On USB-A 3.2 Gen 2 connector* |
6 |
USB-A 3.2 Gen 2 connectors* |
|
7 |
USB-C® (3.2 Gen 2) connectors* |
8 |
Headset connector |
|
9 |
Diagnostic LCD switch |
10 |
Diagnostic LCD |
|
11 |
Flex module* |
* for selected models
Statement on USB transfer rate
Depending on many factors such as the processing capability of the host and peripheral devices, file attributes, and other factors related to system configuration and operating environments, the actual transfer rate using the various USB connectors on this device will vary and will be slower than the data rate listed below for each corresponding device.
| USB device | Data rate (Gbit/s) |
|---|---|
|
3.2 Gen 1 |
5 |
|
3.2 Gen 2 |
10 |
|
3.2 Gen 2 × 2 |
20 |
|
Thunderbolt 3 |
40 |
|
Thunderbolt 4 |
40 |
Power indicator
On: The computer is starting up or working.
Off: The computer is off or in hibernation mode.
Blinking slowly: The computer is in sleep mode.
Always On USB-A 3.2 Gen 2 connector
With the Always On USB feature enabled, the Always On USB-A 3.2 Gen 2 connector can charge a USB-A compatible device when the computer is on, off, in sleep mode, or in hibernation mode.
Enter the UEFI BIOS menu. See Enter the BIOS menu.
Click Devices > USB Setup > Front USB Ports > USB Port 2 to enable the Always On USB feature.
Diagnostic LCD switch
Status |
Behavior and function |
|---|---|
No event |
Short press: Turn on or turn off the diagnostic LCD. Date and time will be displayed on the LCD when it is turned on. The LCD will turn off automatically if idle for three minutes. |
Error events occur |
The diagnostic LCD will turn on automatically
when an error event occurs.
|
Diagnostic LCD
Display the diagnostic information when an issue or error is detected. You can decode the error code at https://www.thinkworkstationsoftware.com/codes.