Do the following to set up the BMC card.
-
Connect your computer to a local network with an
Ethernet
cable through the Ethernet connector on the BMC card.
Note: Ensure that the host computer and client computers are
in the same local area network.
-
Connect
power cables and turn on your computer. Wait at
least 3 minutes for initial startup. You can view the startup process
on the diagnostic LCD.
-
Obtain the dynamic IP
address (for example: 10.176.7.xxx) from either
client BIOS or router port management interface, and then log in to
the BMC remote management console through a web browser (for example: https://10.176.7.xxx/#login).
For initial access, input your username (default: admin) and password (default: admin). It is mandatory to change your
password once you log in.