Overview of the BMC card

Item

Description

Item

Description

Ethernet connector

UART connector

Mini DisplayPort out connector

MicroSD slot

Firmware LED indicator

Note: UART connector is disabled and reserved for future use.

Ethernet connector

Equipped with Ethernet controllers, the Ethernet connector (RJ-45) can transfer data at a speed of 10, 100, or 1000 Mbps.

LED status

Indication

Status 1

The Ethernet is not connected yet.

Status 2

The 10-Mbps Ethernet is connected, ready for transferring data.

Status 3

The 10-Mbps Ethernet is transferring data.

Status 4

The 100-Mbps Ethernet is connected, ready for transferring data.

Status 5

The 100-Mbps Ethernet is transferring data.

Status 6

The 1000-Mbps Ethernet is connected, ready for transferring data.

Status 7

The 1000-Mbps Ethernet is transferring data.

You can install a microSD card (capacity up to 2 TB) in the microSD slot as local media of BMC.

When the LED status indicates Blinking green , it means the firmware works well.

When the LED is off, it means the firmware does not work. To solve the problem, do the following:

Ensure that the cable is correctly connected to the BMC card and to the system board.
Ensure that the BMC card is correctly installed.
If the LED is still off, replace the BMC card with a new one.