You can install or replace a M.2 SSD in the flex module. The flex module supports hot-swappable, which means that you can install or replace the M.2 SSD without even turning off your computer.
Restart the computer. When the logo screen is displayed, press F1 or Fn+F1 to enter the BIOS menu.
Click Devices > Storage Setup > Intel(R) VMD Technology.
Select VMDunder MCIO slotconfiguration.
-
The storage drive in the flex module is hot-swappable only when the operating system of your computer does not reside on the storage drive installed in the flex module. If the requirements is not met, do not remove or install the storage drive when the computer is turned on. Otherwise, data on the storage drive might get damaged.
-
Lock the flex module to prevent the unexpected removal. The keys are attached to the rear of the machine. For security, store the keys in a secure place when you are not using them.
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Replace the internal storage drive only for repair. The internal storage drive is not designed for frequent changes or replacement.
Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get damaged.
Do not apply pressure to the internal storage drive.
Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage drive on a soft material, such as cloth, to absorb physical shocks.
Removal steps
Screw (quantity) |
Color |
Torque |
|---|---|---|
M2 x 3.6 mm, Zn coated(2) |
Blue |
1.5 ± 0.2 lb/in |
|
Screw (quantity) |
Color |
Torque |
|---|---|---|
|
M2 x 4.5 mm, Zn coated(1) |
Black |
1.5 ± 0.2 lb/in |