Enter the Intel RST configuration utility

  1. Ensure that RAID is enabled in the UEFI BIOS menu:

    1. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.

    2. Select Config > Storage > VMD Controller > On.

    3. Press F10 to save changes and exit.

  2. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.

  3. Select Config > Storage > Intel (R) Rapid Storage Technology and then press Enter.

    The Intel (R) Rapid Storage Technology window opens and the following options are displayed:

    • Create RAID Volume: Create a RAID volume. If no internal storage drives can be used, this option is not available.

    • RAID Volumes: Confirm the information of the created RAID volumes.

    • Non-RAID Physical Disks: Confirm the information of all non-RAID drives.

  4. Press the up and down arrow keys to select an option. Press Enter to enter the menu for the selected option. Press Esc to exit the Intel RST configuration utility.

Parent topic: RAID

<© Copyright Lenovo 2023.>