Prerequisite
Before you start, read Generic Safety and Compliance Notices and print the following instructions.
Attention: Do not touch the contact edge of the memory module. Otherwise, the
memory module might get damaged.
For access, do the following:
Disable the built-in battery. See Disable Fast Startup and the built-in battery.
Turn off the computer and disconnect the computer from ac power and all connected cables.
Close the computer display.
Remove the nano-SIM-card tray if your computer comes with one. See Connect to a cellular network (for selected models).
Turn the computer over.
Remove the base cover assembly. See Base cover assembly.
Removal procedure
Installation procedure
Note:
-
You can install the memory in any slot.
-
Memory module replacement might cause memory retraining. For details, see Detect memory retraining (for Intel models only).
