Attention: Do not open your computer or attempt any repair
before reading and understanding the Read this first: Important safety information.
To remove and install the front bezel, do the following:
Prepare your computer. See Preparing your computer and removing the computer cover.
- Release the three plastic tabs on the left side and pivot the front bezel outward to remove it from the computer.Figure 1. Removing the front bezel
To install the front bezel, align the three plastic tabs on the right side of the front bezel with the corresponding holes in the chassis. Then pivot the front bezel inwards until it snaps into position on the left side.
What to do next:
-
To work with another piece of hardware, go to the appropriate section.
-
To complete the installation or replacement, go to Completing the parts replacement.