Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Note:
-
To remove or install the memory module, wait at least 20 seconds after disconnecting power cords from the system. It allows the system to be completely discharged of electricity.
-
Ensure that you follow the installation order for memory modules shown in the following illustration.
Type-1 memory module
For access, do the
following:
Remove the power adapter and power cord. See Power adapter and power cord
.Remove the chassis. See Chassis.
Removal steps:
Remove the memory module.
Installation steps:
Install the memory module.
Type-2 memory module
For access, do the
following:
Remove the power adapter and power cord. See Power adapter and power cord
.Remove the chassis. See Chassis.
Disconnect the system fan cable from the system board, and lift the system fan. See System fan and its heat sink.
Removal steps:
Remove the memory module.
Installation steps:
Install the memory module.
