M.2 solid-state drive and heat sink

Prerequisite

Before you start, read Generic Safety and Compliance Notices, and print the following instructions.


Attention/Caution/Danger icon, warning users and servicers of a hot surface nearby
Before you open the computer cover, turn off the computer and wait several minutes until the computer is cool.
Attention:
The internal storage drive is sensitive. Inappropriate handling might cause damage and permanent loss of data. When handling the internal storage drive, observe the following guidelines:
  • Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for frequent changes or replacement.

  • Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.

  • Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get damaged.

  • Do not apply pressure to the internal storage drive.

  • Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage drive on a soft material, such as cloth, to absorb physical shocks.

For access, remove these parts in order, if any:

Removal steps


Remove the M.2 solid-state drive.